HDPE Jerry Cans Bottle Blow Molding Machine
-
Payment
-
Origin
China Mainland
-
Minimum Order
5
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
20L 25L HDPE Jerry cans bottle extrusion blow molding machine
ABLD80 plastic drum making machine was specially designed for making plastic water tanks, plastic cans, lubricant oil bottles, plastic drums, plastic toys, tool boxes and other plastic containers not over 30L.
Extrusion Blow Molding is the simplest type of blow molding. A hot tube of plastic material is dropped from an extruder and captured in a water-cooled mold. Once the molds are closed, air is injected through the top or the neck of the container; just as if one were blowing up a balloon.
Max. Product volume | 30 liters |
Output capacity | 60~80pc/h |
Screw diameter | 80mm |
Screw L/D ratio | 25 L/D |
Screw drive power | 30KW |
Screw heating capacity | 11 KW |
No.of heating zone | 4 zones |
Output of HDPE | 130 KG/H |
Oil pump drive power | 15KW |
Clamping force | 260 KN |
Max.size of mold | 700X950mm |
Mold stroke | 450-1000mm |
Max.die diameter | 340mm |
Die heating power | 7.6 KW |
Die heating segments | 4 zones |
Blowing pressure | 0.8mpa |
Air volume | 1.0 M3/MIN |
Cooling water pressure | 0.3mpa |
Water consumption | 90 L/MIN |
- Single Station HDPE Jerry Cans Blow Molding Machine 5 Pieces / (Min. Order)
- Oil Bottles Full Automatic Blow Molding Machine 5 Pieces / (Min. Order)
- PP Bottles Blow Molding Machines 5 Pieces / (Min. Order)
- PVC Bottles Blow Molding Machine 5 Pieces / (Min. Order)
- PE Bottles Blow Molding Machine 5 Pieces / (Min. Order)